| Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations, Lighting Equipment |
|---|---|
| Certification: | RoHS, ISO9001, ASTM, JIS, GB, EN |
| Technique: | Cold Drawn |
| Grade: | 1000 Series |
| Temper: | O - H112 |
| Surface Treatment: | Mill Finish |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier | Printed Aluminum Sheet Dimensions | |||
| Parameter | Range | Standard | Tolerance |
| Thickness (mm) | 0.18 _ 0.25 | 0.18, 0.20 | +0.005/-0.005 |
| Width (mm) | 50 _ 1250 | 813, 845, 833.8, 835 | +0.5, -0 |
| Length (mm) | 400 _ 1000 | 655, 706 | +0.5, -0 |
| Diagonal difference for sheet (mm) | 1 max | - | - |
| Coil sizes (mm) | OD: 1450 max ID: 75, 150, 300, 508 |
- | - |
| Coil density (kg/mm) | 3.5 max | - | - |
| Offer for thickness and width outside the range may be quoted on specific request | |||
| Earing of printed aluminum sheet |
| Typical value: < 2 per cent for > =0.18 mm thickness |
| Printed Aluminum Sheet Mechanical properties | ||||
| Alloy (AA) | Temper | UTS (mpa) | % E (min) (at 50 mm gauge length) |
|
| Min | Max | |||
| 3105 | H14 | 150 | 200 | 1 |
| 8011 | O | 8.5 | 12 | 15 |
| H14 | 125 | 170 | 1 | |
| H24 | 125 | 160 | 1 | |
| Printed Aluminum Sheet Chemical composition | ||
| Alloy (%) | AA 3105 | AA 8011 |
| Fe | 0.70 | 0.6 _ 1.0 |
| Si | 0.60 | 0.5 _ 0.9 |
| Mg | 0.20 _ 0.80 | 0.05 |
| Mn | 0.3 _ 0.8 | 0.20 |
| Cu | 0.30 | 0.10 |
| Zn | 0.25 | 0.10 |
| Ti | 0.10 | 0.08 |
| Cr | 0.10 | 0.05 |
| Each (others) | 0.05 | 0.05 |
| Total (others) | 0.15 | 0.15 |
| Al | Remaining | Remaining |
| Single number indicates maximum content | ||
| Printed Aluminum Sheet Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
| Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used and the sheets are wrapped with protective thermocol sheets. |
| Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}