Application: | Cooking Pan, Fryer, Reflector of The Light |
---|---|
Certification: | ISO9001, ASTM, GB, SGS |
Technique: | Cold/Hot Rolled |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
PRODUCT
NAME |
ALLOYS NUMBER | TEMPER |
THICKNESS
(MM) |
DIAMETER
(MM) |
DEEP DRAWING USAGE | APPLICATION |
Roller
Coated Aluminum circle |
1050,1060,1070,1100, 3003,5052 |
O,H12,H14 H18 H24,H22 |
0.8-4.5 | 200-500 | Yes |
Cookware,Cooking Utensil, Pressure Cookware,
Kitchen Disc,Cooking Pan, Fryer,Reflector of the light etc . |
Chemical Composition % | ||||||||||||
Alloy No. | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | V | Ti | Zr | Al |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.05 | 0.03 | - | Remainder |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | 0.05 | 0.03 | - | Remainder |
1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | 0.05 | 0.03 | - | Remainder |
1100 | 0.45 | 0.35 | 0.05-0.20 | 0.03 | - | - | - | 0.01 | 0.05 | - | - | Remainder |
2014 | 0.50-1.20 | 0.7 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | - | 0.25 | - | 0.15 | - | Remainder |
2017 | 0.20-0.80 | 0.7 | 3.5-4.5 | 0.40-1.0 | 0.4-0.8 | 0.1 | - | 0.25 | - | 0.15 | - | Remainder |
2024 | 0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.1 | - | 0.25 | - | 0.15 | - | Remainder |
3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | Remainder |
3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | Remainder |
3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | - | 0.4 | - | 0.1 | - | Remainder |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | - | - | Remainder |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | Remainder |
5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | 0.15 | - | Remainder |
5086 | 0.4 | 0.5 | 0.1 | 0.2-0.7 | 3.5-4.5 | 0.05-0.25 | - | 0.25 | - | 0.15 | - | Remainder |
5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | - | 0.25 | - | 0.1 | - | Remainder |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | 0.1-0.6Mn+Zn | 0.15 | - | Remainder |
6061 | 0.4-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | 0.15 | - | Remainder |
6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.90 | 0.1 | - | 0.1 | - | 0.1 | - | Remainder |
6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | 0.1 | - | Remainder |
7005 | 0.35 | 0.4 | 0.1 | 0.2-0.7 | 1.0-1.8 | 0.06-0.20 | - | 4.0-5.0 | - | 0.01-0.06 | 0.08-0.20 | Remainder |
7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | - | 0.2 | - | Remainder |
7175 | 0.15 | 0.2 | 1.2-2.0 | 0.1 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | - | 0.1 | - | Remainder |
8011 | 0.50-0.90 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.05 | - | 0.1 | - | 0.08 | - | Remainder |
8021 | 0.15 | 1.2-1.7 | 0.05 | - | - | - | - | - | - | - | - | Remainder |
8079 | 0.05-0.3 | 0.7-1.3 | 0.05 | - | - | - | - | 0.1 | - | - | - | Remainder |
Performance
1)Excellent elongation and tensile strength;
2)Processing performance is good, stamping, stretch forming high performance;
3)Gas welding, hydrogen welding, resistance welding and brazing;
4)High plasticity, conductivity and thermal conductivity;
5)Easy to take all kinds of pressure processing and extension, bending;
The performance of PE color coated coil
1) Thickness≤0.5mm
Item | Test Item | Standard | National standard | Test Result |
1 | Color Difference | ECCA T3 | ΔE≤2.0 | ΔE≤1.5 |
2 | Gloss Difference | ECCA T2 | ≤10 | ≤5 |
3 | Coating Thickness | ECCA T1 | Min 14µm | ≥16µm |
4 | Pencil Hardness | ASTM D3363 | ≥HB | HB |
5 | T-bend | ASTM D4145 | ≤3T | ≤2T |
6 | Adhesion | ASTM D3359 | Grade 0 | Grade 0 |
7 | Impact | ASTM D2794 | ≥20kg.cm | ≥20kg.cm |
8 | Boiling water Resistance | GB/T17748 | 2h no change | 2h no change |
9 | Solvent Resistance | ASTM D2248 | 200 times paint remaining | 200 times paint remaining |
10 | Salt Resistance | ASTM B117 | 720 hrs≤grade 1 | 720hrs≤grade 1 |
11 | Dirt Resistance | GB/T9780 | ≤5% | <5% |
12 | Color retaining | GB/T16259 | 600hrs △E≤2.0 | △E≤2.0 |
13 | Gloss weaken Level | 600hrs ≤ grade 2 | 600hrs ≤ grade 2 | |
14 | Chalking | 600hrs No Change | No Change |
2) The performance of PVDF color coated coil
Item | Test Item | Standard | National standard | Test Result |
1 | Color Difference | ECCA T3 | ΔE≤2.0 | ΔE≤1.5 |
2 | Gloss Difference | ECCA T2 | ≤10 | ≤5 |
3 | Coating Thickness | ECCA T1 | Two layers Min 23μm | ≥25μm |
Three layers Min 30μm | ≥34μm | |||
4 | Pencil Hardness | ASTM D3363 | ≥HB | HB |
5 | T-bend | ASTM D4145 | ≤2T | ≤2T |
6 | Adhesion | ASTM D3359 | Grade 0 | Grade 0 |
7 | Impact | ASTM D2794 | ≥50kg.cm | ≥50kg.cm |
8 | Boiling water Resistance | GB/T17748 | 2h No change | 4h No change |
9 | Solvent Resistance | ASTM D2248 | 200 times paints remaining | 500 times no break |
10 | Acidity Resistance | ASTM D1308 | 5%HCL 24hrs No change | No change |
11 | Alkali Resistance | ASTM D1308 | 5%NaOH 24hrs No change color △E≤2.0 | No change |
12 | Nitric acid Resistance | AAMA620 | △E≤5.0 | △E≤5.0 |
13 | Oil Resistance | ASTM D1308 | 20#oil 24hrs No change | No change |
14 | Salt Spray Resistance | ASTM B117 | 4000hrs ≤Grade 1 | No change |
15 | Abrasion resistance | ASTM D968 | ≥5L/μm | ≥5L/μm |
16 | Dirt Resistance | GB/T9780 | ≤5% | <5% |
17 | Color retaining | GB/T16259 | 4000 hrs△E≤4.0 | 4000 hrs △E≤3.0 |
18 | Gloss weaken Level | 4000 hrs ≤ Grade 2 | 4000 hrs ≤ Grade 2 | |
19 | Chalking | 4000 hrs No change | 4000 hrs No change |
Packaging
Aluminum circle sheet is placed to wooden pallet or wooden case ,wrapped by water-proof craft paper perfectly , then fixed by iron narrow belt well.
2) Port:Qingdao port or other main port in China3) Container:20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) , loading 18~25 tons .
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) , loading 20~28 tons.
Certificate
FAQ
A: We are factory and we can provide competitive price
A: Generally it is 10-15 days if the goods are in stock. Or it is 15-25 days if the goods are not in stock, it is according to quantity and standard.
A:We have strict quality control system .We can Visit Our factory is the best way to know each other more. And we also will attach some relevant photos via email to show our office and products for you.
A:Generally speaking, the MOQ is 3 metric ton per size, if your quantity is small , we can supply you from our stock .
A: Yes, we could offer the sample for free charge but the cost of freight is by receiver ,normally
A:T/T ,D/D,L/C at sight,Acceptance L/C,Deferred Payment L/C and so on